How to distinguish the authenticity of tungsten steel round rods?

Recently, a friend complained to me: “I spent a lot of money to buy a tungsten steel round rod, but it broke after half a month of use! The manufacturer said it was my problem, but after testing, it turned out that there was a lot of iron powder mixed in this “tungsten steel”!” Such stories are not uncommon in the manufacturing industry. As a “veteran” who has been in the industry for ten years, today I will use plain language to teach you some practical skills, so that you can easily see through the routines of fakes and choose reliable hard goods! At the end of the article, the “anti-counterfeiting ID card” of the formal carbide rod factory (hard alloy round rod factory) will be revealed. It is recommended to collect it for backup!

Carbide round bar

1. 4 common “plastic surgery” of fake tungsten steel round rods

There are many kinds of fake routines on the market, but they can be summarized as follows:

1) “Sandwich” type

The surface is coated with a layer of tungsten steel, and the core is made of cheap high-speed steel or even ordinary steel. This round rod is OK at first, but once the outer layer is worn, the core material will be exposed immediately, and sparks will fly during processing.

2) “Water dilution” type

Reduce the proportion of tungsten carbide (normal content should be ≥85%), and add a large amount of cheap metals such as cobalt and nickel. The hardness of this material barely meets the standard, but the red hardness is extremely poor-it becomes as soft as plasticine when the temperature is high.

3) “Plastic surgery failure” type

Recycle the waste tungsten steel knives, melt them and re-draw them into round rods. Due to the high temperature and stress, the internal grains are coarse, like dough that has been repeatedly kneaded, and the strength and wear resistance plummet.

4)  “Fake” type

Use stainless steel or mold steel to impersonate tungsten steel, and sandblast the surface to cover the material. This fake will be exposed when sucked by a magnet (real tungsten steel has extremely weak magnetism), but novices can easily fall into it.

2. 5 quick identification methods, used by workshop masters

The first method: look at the “identity card” – test report

A regular carbide rod factory will definitely provide a third-party test report, focusing on three items:

Density: The density of real tungsten steel is ≥14.5g/cm³ (ordinary steel is only 7.8g/cm³)

Hardness: HRA≥90 (equivalent to HRC70 or above)

Composition ratio: tungsten carbide content ≥85%, cobalt binder 10%-15%

Tips: Use a vernier caliper to measure a 10cm long round rod, weigh it and calculate the density (weight ÷ volume). If it is less than 14g/cm³, return it directly!

The second method: listen to the sound to identify “internal injuries”

Hang the tungsten steel round rod in the air and tap it gently with a metal rod:

Genuine: The sound is crisp and long, similar to tapping porcelain

Fake: The sound is dull and short, like tapping an iron block
This is because the internal structure of high-density tungsten steel is dense and the sound wave propagates quickly.

The third trick: Grinding wheel spark test

Find a grinding wheel machine to grind the end face of the round rod (remember to wear goggles!):

Real tungsten steel: The spark is extremely short and dark red, like a spark

Fake goods: The spark is bright yellow with forks

Full fake goods: Sparks are flying like fireworks, obviously ordinary steel

The fourth trick: Pickling reveals the true identity

Drop 10% nitric acid solution on the surface of the round rod (be careful!):

Real tungsten steel: No obvious reaction, the surface maintains a metallic luster

Fake goods: Bubbles are generated quickly, and the solution becomes turbid
This is because tungsten steel has strong corrosion resistance, while ordinary metals react violently with acids.

The fifth trick: violent testing method

Use waste materials for destructive testing (suitable for random inspection when purchasing in large quantities):

Bending test: A genuine tungsten steel round rod with a diameter of 10mm can withstand a pressure of ≥300kg without breaking

Drop test: Free fall from a height of 2 meters, the genuine product will at most have a small gap, while the fake product will often break directly

3. Choose the right carbide rod factory to save worry and money

Instead of struggling to identify, it is better to eliminate fakes from the source! Regular carbide rod factories have these characteristics:

1) Transparent production process

Only those who dare to open the factory for visits are real bosses. For example, a German brand carbide rod factory has a full visualization of the entire process from powder metallurgy to sintering moulding, and the raw material barrels are affixed with QR codes, which can be scanned to check the traceability information.

2) The truth is in the details

Packaging: Clearly printed with factory logo, batch number, and material parameters

Cut: The cut end face of real tungsten steel is fine and burr-free, while fakes often have broken edges

Weight: A round rod with a diameter of 20mm×100mm, the weight of the real one is ≈450g, and if it is lighter than 10%, there must be a problem

3) Professional after-sales service

Provide free material testing, and technical consultation, and even send engineers to provide on-site guidance. A well-known domestic carbide rod factory also launched a “fake one compensate ten” promise, which is very confident!

4. Blood and tears case: greed for cheapness and big losses

Boss Wang in Zhejiang bought a batch of “special price tungsten steel round rods” for cheapness, and the knife frequently broke when processing automobile molds. Third-party testing found that:

The tungsten carbide content is only 62%, doped with 38% iron powder

Density 13.2g/cm³, hardness HRA82
The production line was eventually shut down for 3 days, with a loss of more than 200,000! Although the unit price of the same specification products of regular carbide rod factories is 15% higher, the service life is 3 times longer, which saves the overall cost.

5. Crash Course of Industry Jargon

When dealing with suppliers, these words will make you an expert in seconds:

“Is your rod made by HIP (hot isostatic pressing) process?” (High-end tungsten steel must use this technology)

“Can the grain size reach below 0.5μm?” (The smaller the number, the higher the strength)

“Is there an SGS report?” (International general testing and certification)
If the other party hesitates, change to another one!

Conclusion: True gold is not afraid of fire, and good goods are not afraid of inspection

Tungsten steel round rods are the “heart material” of tool manufacturing. Choosing the wrong supplier will result in loss of money or even safety accidents. Remember two principles: “Don’t be greedy for small bargains, and big factories are reliable.” Next time you purchase, you may wish to contact the ISO-certified carbide rod factory directly to save the trouble of counterfeiting and enjoy professional technical services-after all, the time cost is the most expensive!

LinkedIn
Reddit
Facebook
WhatsApp
X
Pinterest
Tumblr

Leave a Comment

Your email address will not be published. Required fields are marked *

The Main Supplier Of Cemented Carbide Products In The World

LMM Cemented Carbide specializes in the production of various types of CNC precision cutting tools such as carbide milling cutters, carbide bars, carbide drills, and carbide hobs.

Get In Touch

Contact US

The main supplier of cemented carbide products in the world