Methods of drill bit material selection based on different use

drill bit material selectionThe main materials for drill bits are as follows:

1) High-speed steel drill bits 2) Carbide drill bits 3) Diamond drill bits 4) Super-hard alloy drill bits

Methods of drill bit material selection based on different use

1. How to choose drill bit material when drilling holes in wood materials?

When drilling holes in wood, you need to use a woodworking drill bit. The woodworking drill bit has a large cutting volume and does not require high tool hardness. The tool material is generally selected from general high-speed steel (HSS).

2. Drilling holes in general metal materials (alloy steel, non-alloy steel, cast iron, cast steel, non-ferrous metals)

Drilling holes in general metal materials requires the use of a metalworking drill bit. The drill bit material is generally selected from high-speed steel (high-grade tools contain the element cobalt HSS-Co).

3. Drill bit material selection when drilling holes in concrete and stone materials

Use an impact drill with a masonry drill bit. The cutter head material is generally selected from carbide.

4. Drilling holes on harder tiles and glass

Drilling holes on tiles and glass requires a tile drill bit, and the tool material should be tungsten-carbon alloy. Because tungsten-carbon alloy tools have high hardness and poor toughness, it is necessary to pay attention to low-speed and no-impact use.

5. How to choose the drill bit material for drilling holes in hard materials such as stainless steel and high-temperature alloys?

Carbide drill bits are required for drilling holes in these hard materials. Carbide drill bits are an alloy material containing hard particles such as tungsten carbide. Carbide has very high hardness, and its wear resistance and heat resistance are better than high-speed steel drill bits.

6. Processing extremely hard materials such as gemstones and glass

Diamond drill bits are required for processing extremely hard materials. Diamonds are the hardest substance known in nature, so diamond drill bits can be used to achieve efficient and accurate drilling on these extremely hard materials. However, due to the high price of diamonds, its application is relatively limited.

7. How do you choose the drill bit material for processing high-hardness materials?

Superhard alloy drill bits, such as titanium alloy, are a new type of drill bit material. This type of drill bit combines the advantages of multiple materials, not only has high hardness and good wear resistance but also has good toughness. Therefore, superhard alloy drill bits are particularly suitable for processing high-hardness materials and can also show good performance in complex environments. The emergence of these drill bits has further broadened the application field of drill bits.

FAQ

A: The transition is justified under two conditions: high-volume automated production or machining hard materials (>35 HRC). While Cobalt HSS handles machine deflection well due to its high elasticity, Solid Carbide offers vastly superior red hardness and rigid geometric stability. This allows you to scale cutting speeds (Vc) by 3 to 4 times and dramatically lower the cost-per-hole in stable CNC environments.

 A: Highly ductile (gummy) materials like low-carbon steel, aluminum, or pure copper generate long, continuous chips and localized friction heat. For these, a polished HSS-Co or a sub-micron Carbide substrate with a low friction PVD coating (like TiAlN) is necessary. If the substrate surface is too rough, the workpiece material will cold-weld to the cutting edge, leading to built-up edge (BUE) and immediate chip packing failure.

A: Tungsten carbide is a highly rigid ceramic-metal composite with exceptional compressive strength but low tensile elasticity. Manual drilling operations lack the structural rigidity of CNC spindles, introducing severe radial runout and lateral deflection. When a carbide drill bends even slightly under manual feed forces, it undergoes brittle fracture, leading to instant catastrophic chipping. HSS or Cobalt drills are preferred for manual setups due to their high fracture toughness.

A: PCD drills should be selected for highly abrasive, non-ferrous materials, such as Carbon Fiber Reinforced Plastics (CFRP), high-silicon aluminum alloys, and green ceramics. PCD features unmatched abrasive wear resistance. However, PCD cannot be used to drill ferrous metals (steels and cast irons) because the iron chemically reacts with the carbon atoms in the diamond at high temperatures, converting the diamond back into graphite and causing rapid tool degradation.

A: Cobalt acts as the matrix binder for the tungsten grains. For drilling applications, which involve both rotational torque and axial impact, a Cobalt content of 10% to 12% is typically utilized. This provides an optimized balance of Transverse Rupture Strength (TRS) and hardness. Lowering the Cobalt content increases hardness but makes the drill bit too brittle to handle the torsional stress of deep-hole drilling.

LinkedIn
Reddit
Facebook
WhatsApp
X
Pinterest
Tumblr

Leave a Comment

Your email address will not be published. Required fields are marked *

The Main Supplier Of Cemented Carbide Products In The World

LMM Cemented Carbide specializes in the production of various types of CNC precision cutting tools such as carbide milling cutters, carbide bars, carbide drills, and carbide hobs.

Get In Touch

Contact US

The main supplier of cemented carbide products in the world