Carbide rod, Cemented Carbide Rod, carbide rod factory

Cemented Carbide Rod Blanks

Our company produces various specifications of Cemented Carbide Rod, single straight hole rods, double straight hole rods, and spiral hole rods, and can also customise non-standard and special-shaped products according to customer requirements

Cemented carbide rod blanks are the base material of cemented carbide tools. They are processed into milling cutters, planers, drills, boring cutters, etc., through CNC machine tools. They are used to cut cast iron, non-ferrous metals, plastics, chemical fibres, graphite, glass and ordinary steel. They can also be used to cut difficult-to-process materials such as heat-resistant steel, stainless steel, high manganese steel, tool steel, titanium alloy, and high-temperature alloy.

As a professional carbide rod manufacturer, LMM Cemented Carbide provides high-quality cemented carbide rod products with high-end tungsten carbide powder raw material and international advanced production and testing equipment, such as a German PVATePla vacuum sintering furnace, a Japanese Tokai extrusion machine, KLINGENBERG and ZOLLER, and a perfect management system.

Our company produces various specifications of cemented carbide rods, such as single straight hole rods, double straight hole rods, and spiral hole rods, and we can also customise non-standard and special-shaped products according to customer requirements.

Carbide rodcarbide square blank

carbide rod, uses of carbide rod carbide rodcarbide rod     carbide square blank

 

Technical FAQ

Expert Answer: For our as-sintered blanks, we typically maintain a diameter tolerance of +0.3mm to +0.8mm and a length tolerance of +1.0mm to +3.0mm.

Technical Note: If you are utilizing high-speed automated loading systems (e.g., Walter or Schütte grinders), we can provide “h6” precision ground blanks or “semi-finished” rods with a tighter +0.15mm allowance to significantly reduce your wheel wear and cycle times.


Expert Answer: We recommend our sub-micron grain size grades with a Cobalt (Co) content of 10% to 12% (e.g., Grade LMG10).

Why this works: The sub-micron structure provides a superior balance of hardness and fracture toughness. This prevents “built-up edge” (BUE) and maintains sharp cutting edges under the extreme thermal loads characteristic of aerospace alloy machining.

Expert Answer: Every batch of LMM Cemented Carbide rods undergoes HIP (Hot Isostatic Pressing) Sintering at pressures exceeding 10MPa. Quality Assurance: This process effectively eliminates micro-voids and porosity. Post-sintering, we perform Ultrasonic Flaw Detection and metallographic analysis to ensure the Transverse Rupture Strength (TRS) is consistent throughout the entire length of the rod, preventing catastrophic failure during high-speed rotation.

Expert Answer: Straightness is critical for tool balance. Our standard 330mm rods are controlled within ≤0.15mm per 100mm of length. Production Detail: For ultra-long or thin rods, we utilize vertical sintering processes to counteract gravity-induced sagging, ensuring that the rods remain highly concentric for your centerless grinding operations.

Expert Answer: Yes, we provide blanks with central coolant holes, two straight holes, and 30°/40° helical coolant holes.

Precision Metrics: Using advanced extrusion technology, we maintain a very low eccentricity for coolant paths. This ensures that the oil-hole exit points on your finished drills are perfectly symmetrical, providing uniform cooling and chip evacuation during deep-hole drilling.

Request a Quote

Related Product

Contact US

The main supplier of cemented carbide products in the world