Four-Flute Corner-Radius End Mills
For Stronger Cutting Edges
LMM manufactures four-flute corner-radius end mills for profile milling, shoulder milling, slotting, die and mold machining, roughing and finishing applications.
A controlled radius between the side cutting edges and the end cutting edges strengthens the tool corner. Compared with a sharp square corner, a corner-radius design can reduce the risk of localized corner chipping in suitable machining conditions.
Reliable Profile Milling, Shoulder Milling and Slotting Performance
These tools can be reviewed for carbon steel, alloy steel, stainless steel, cast iron, pre-hardened steel, tool steel and selected hardened materials. The corner radius, diameter, cutting length, flute geometry, carbide grade, coating and edge preparation should be selected according to the part drawing and cutting operation.
Key Benefits
- Four-flute design for a strong core and stable cutting.
- Controlled corner radius for improved corner strength.
- Suitable for profile milling, shoulder milling and selected slotting operations.
- Can reduce sharp-corner edge damage when the radius and cutting conditions are properly selected.
- Available for general-purpose, standard and high-hardness applications.
- Custom corner radii, cutting lengths, shank dimensions and special profiles can be reviewed.
Product Features
Controlled Corner Radius
The corner radius blends the end cutting edge and side cutting edge. The radius value must match the part geometry, tool path and required corner condition.
A larger radius generally provides a stronger corner, while a smaller radius can access tighter features. The tool radius should never be selected without considering the part drawing and the required internal or external profile.
Four-Flute Cutting Structure
Four flutes provide a balanced combination of tool strength, feed capacity, chip space and surface finish. The actual flute geometry should be matched to the workpiece material and engagement conditions.
Solid Carbide Construction
Solid cemented carbide provides rigidity and wear resistance for precision milling. Stable clamping, low runout, suitable tool overhang and rigid workholding are essential because carbide tools are less tolerant of vibration and impact than tougher tool materials.
Recommended Applications
Four-flute corner-radius end mills can be reviewed for:
- Profile milling
- Shoulder milling
- Slotting with a strengthened cutting corner
- Pocketing
- Die and mold components
- Hardened-steel finishing
- Pre-hardened-steel machining
- Stainless-steel machining
- General CNC production machining
- Applications where sharp-corner chipping is a concern
Workpiece Material Guidance
| Workpiece material | Application direction |
| Carbon steel | General profiling, shoulder milling and slotting |
| Alloy steel | Select grade, coating and radius according to hardness |
| Stainless steel | Prioritize edge stability and chip evacuation |
| Cast iron | Confirm abrasive wear resistance and edge preparation |
| Pre-hardened steel | Select radius and coating according to actual hardness |
| Tool steel | Review geometry, coating and finishing allowance |
| Hardened steel | Use a high-hardness design after technical review |
| Aluminum alloy | A high-chip-space geometry may be more suitable for some operations |
Specification Fields
| Item | Description |
| Tool type | Four-flute corner-radius solid carbide end mill |
| Tool material | Solid cemented carbide |
| Number of flutes | Four, subject to final tool design |
| Corner radius | Confirmed according to part drawing |
| Cutting diameter | Confirmed according to tool drawing and profile |
| Cutting length | Selected according to required axial depth |
| Overall length | Selected according to machine clearance |
| Shank diameter | Confirmed according to tool holder |
| Helix geometry | Selected according to material and chip control |
| End geometry | Corner-radius, center-cutting or application-specific |
| Coating | Application-dependent and subject to availability |
| Tolerance | Confirmed according to drawing and inspection basis |
How to Select the Corner Radius
Match the radius to the part
The tool corner radius should be equal to or smaller than the required part radius, depending on the machining strategy. The final radius must be checked against the part drawing and tool path.
Balance access and edge strength
A larger radius can provide a stronger cutting corner but may not reach small internal features. A smaller radius improves access but may be more sensitive to edge damage. Select the largest practical radius that satisfies the geometry.
Consider the machining operation
Profile milling, shoulder milling, slotting and finishing place different loads on the corner. Confirm axial depth, radial engagement and whether the cut is continuous or interrupted.
Cutting Parameter Guidance
Cutting speed, feed per tooth, axial depth, radial engagement and coolant must be selected according to workpiece material, hardness, cutter diameter, corner radius, number of flutes, coating, spindle capability and tool overhang.
Corner-radius tools should not automatically be run at the same conditions as square end mills. The radius changes local engagement and cutting load. Use reference conditions as starting points and validate tool wear, surface finish and dimensional accuracy during testing.
Manufacturing and Quality Control
The manufacturing process may include carbide preparation, pressing, sintering, precision grinding, flute grinding, corner-radius grinding, edge preparation, coating coordination and final inspection.
Quality-control items may include corner radius, cutter diameter, shank diameter, cutting length, overall length, runout, flute geometry, edge condition, surface quality, coating condition and compliance with the approved drawing.
Corner-radius inspection is particularly important when the tool is used for mold, die or profile machining.
Customisation and Quotation
For a quotation, please provide the required cutter diameter, corner radius, cutting length, overall length, shank diameter, number of flutes, workpiece material and hardness, machining operation, machine model, tool holder, coating preference, quantity and target delivery date.
Custom options may include non-standard corner radii, extended reach, variable helix, unequal flute spacing, special neck geometry, special coatings, chamfered ends and profile-specific cutting forms.
FAQ
A corner-radius end mill has a controlled radius between the side cutting edge and the end cutting edge. The radius strengthens the tool corner and can reduce sharp-corner chipping in suitable applications.
They are used for profile milling, shoulder milling, slotting, pocketing, mold and die machining, and selected hardened-steel finishing operations.
The rounded corner can provide better local edge strength than a sharp corner, but actual performance depends on radius, carbide grade, geometry, cutting conditions and machine stability.
Choose a radius that satisfies the part drawing while providing the largest practical cutting corner. The radius must also allow the tool to reach the feature without interference.
Yes. We can review custom radii, diameters, cutting lengths, shank dimensions, coatings and special geometries according to a drawing or sample.



