The production process of cemented carbide round bar mainly includes mixture preparation, molding, sintering and deep processing.
1. Mixture preparation of carbide round bar
Mixture preparation is a production process in which various refractory metal carbides and bonding metals and a small amount of inhibitor powders are prepared into a granular mixture with accurate composition, uniform distribution of ingredients and certain particle size through batching calculation, ball milling, drying and other processes. It is the first process in cemented carbide production; the mixture is the raw material for producing cemented carbide compacts, and the quality is directly related to the internal and appearance quality of cemented carbide products.
Modern mixture production process flow:
Batch calculation → batching → wet grinding → spray drying → mixture identification

1) Batch calculation
Different grades in cemented carbide production have different components, that is, there is a standard composition. The core content of batch calculation is how to calculate the total carbon of the grade and the proportion weight of various raw materials according to the instructions; and the carbon amount is regulated by means of supplementing C/W. Until the quality requirements are met.
2) Batching and wet grinding
Batching is to add various powder raw materials and auxiliary materials required by the batching instructions into the ball mill in a certain order, and then add grinding alcohol and molding agent to ball grind together.
The main function of wet grinding is to make the powder raw materials formulated into fixed components have a certain particle size and a mixed slurry with uniform distribution of each component through this process.
3) Spray drying
The purpose of drying the mixed slurry is to separate the liquid medium in the wet grinding slurry from the mixed material and recover its medium, so that the dried mixed material can reach a certain physical-mechanical performance standard and meet the performance requirements of the subsequent process-pressing molding for the mixed material. There are many ways to dry the mixed material, which are generally determined according to the production process needs, production scale and equipment investment. Our factory currently adopts a large-scale modern spray drying production process for producing high-precision products.
The biggest feature of spray drying is that it is dried under the protection of nitrogen in a closed circulation system. The granular mixture obtained by spray drying has stable performance and excellent fluidity, which is particularly suitable for the production of high-precision molded rod blanks.
4) Mixture identification
Mixture identification data is the original data for mixture quality assessment and the original basis for alloy production.
Mixture physical and mechanical property inspection: Inspection items include fluidity, bulk density, particle size distribution and material appearance inspection.
Mixture PS21 inspection: Inspection items include C1 and C2 value measurement, bending strength, hardness, density, cobalt magnetism and coercive force, etc.; metallographic structure includes porosity, macroscopic pores and other items.
2. Forming of carbide round bar
Forming is the most operational process in cemented carbide production and is the key process to ensure the accuracy and apparent quality of cemented carbide round bar. It is the process of compacting powder into a block with the desired shape. Its basic requirement is to have a certain strength and specified size.
1) Precision die pressing
Precision pressing requires not only good hardware but also good software. Specifically, it requires: high-precision press (TPA press), high-precision mold, high-performance mixture, precise pressing process parameters and other basic conditions to better produce high-precision bars.
The pressing process includes: pressing cycle, pressing process parameters and their calculation, mixture selection standards, die selection standards, boat selection standards, pressing quality standards, return material processing, etc.
2) Extrusion molding
Extrusion molding is to put the plasticized mixture into the extrusion barrel, install a mold at one end of the extrusion barrel, and insert an extrusion rod at the other end of the extrusion barrel. The pressure of the extruder is transmitted to the mixture through the extrusion rod, so that it passes through the die hole and becomes a product of a certain shape. Its advantages are: the length of the product is not limited in principle, and the longitudinal density is relatively uniform, the production continuity is strong, the efficiency is high, the equipment is simple, and the operation is convenient.
3) Isostatic Pressing (Cold Isostatic Pressing)
Cold isostatic pressing is based on Pascal’s principle. The pressed powder is sealed in an elastic mold with a certain shape and size, and then placed in a closed high-pressure container. The liquid medium is pumped into the container through a high-pressure pump. The medium evenly applies pressure to each surface of the elastic mold. The powder in the elastic mold is also subjected to equal pressure in all directions and the shape when installed is proportionally reduced, so that the powder is compacted into a compact with a certain shape, size and sufficient strength.
3. Sintering
Sintering is the last major process in the production of cemented carbide. The purpose of sintering is to transform the porous powder compact into an alloy with a certain structure and performance.
The sintering of cemented carbide is relatively complex, with both physical changes and chemical reactions, but it is mainly a physical process, densification of the sintered body, growth of carbide grains, changes in the composition of the bonding phase, and the formation of the alloy structure.
The whole sintering process can be roughly divided into four stages:
- Dewaxing pre-burning stage (<800℃)
- Solid phase sintering stage (800℃-eutectic temperature)
- Liquid phase sintering stage (eutectic temperature-sintering temperature)
- Cooling stage (sintering temperature-room temperature)
4. Deep processing
Cemented carbide has a series of advantages such as high hardness, good red hardness, and excellent wear resistance. This is the unique feature of cemented carbide that is widely used in many departments such as machinery manufacturing, tool manufacturing, mining rock drilling, and electronic communications. However, the poor machinability of cemented carbide has limited its application range to a certain extent.
There are different degrees of difference between the shape and dimensional accuracy of the sintered product and the shape and dimensional accuracy required for actual use. In addition, with the continuous development of market demand, there are quite high requirements for the surface quality of the product, which cannot be met by the sintered blank. It can be seen that in most cases, cemented carbide must be deeply processed to meet the use requirements in terms of shape accuracy, dimensional accuracy, and surface roughness.
1) Grinding method
Due to the high hardness of cemented carbide, there are not many technologies that can be used for post-sintering processing. The main grinding methods for bars are cylindrical grinding. The most common cylindrical grinding is centerless grinding, and sometimes surface grinding is also used to a certain extent (mainly for repairing notches and trimming pallets).
Centerless grinding is a grinding method in which the workpiece is placed on the pallet and guide plate in front of the machine tool and pushed into the grinding area, and then passed out from the back of the machine tool for grinding.
2) Grinding tools
Generally speaking, diamond grinding wheels are composed of two parts-the matrix and the grinding layer. The matrix determines the static and dynamic rigidity and shock absorption of the grinding wheel. Steel matrix or aluminum matrix has high rigidity and thermal conductivity, but poor shock absorption. Unlike the above materials, aluminum-synthetic resin composite materials can provide good shock absorption and sufficient rigidity, so this material has been used in many occasions.
The characteristics of the grinding layer include: abrasive material, abrasive type, abrasive grain size, abrasive concentration and bond type and hardness.
The diamond type in the grinding layer has a significant impact on the grinding results. For the grinding of cemented carbide, synthetic diamond has replaced natural diamond. By selecting different process parameters, people can control the performance of synthetic diamond to meet the processing requirements. Generally, diamond abrasives also need another layer of nickel or copper to improve the performance with the bond.
3) Dressing of grinding wheels
The processing effect of grinding wheels is affected by dressing, and the various methods used to dress grinding wheels must be treated separately. Grinding wheel profiling is used to generate a special geometric shape on the working surface of the grinding wheel. The sharpening dressing process achieves the purpose of producing a special surface morphology and sufficient chip removal space by reducing the bonding material and grinding, and the cutting edge of each abrasive grain is also sharpened. The cleaning dressing process only removes the old grinding chips from the gaps between the abrasive grains. Different abrasives and different bonding systems use different dressing tools.
4) Carbide round bar grinding technology
In addition to the performance of the binder, the particle size of the diamond abrasive has a great influence on the wear of the grinding wheel and the surface quality of the workpiece. Under the same grinding conditions, a fine-grained grinding wheel can obtain a better surface quality of carbide round bar. On the contrary, a coarse-grained grinding wheel can obtain a higher grinding ratio.
The concentration of diamond abrasives in the grinding wheel is considered to be another most important characteristic value in the practical application of the grinding wheel. The higher the concentration of the grinding wheel, the less the grinding wheel wear and the higher the finish of the workpiece. The only disadvantage of high concentration is that the grinding force is large and the grinding ability is poor.
5) Common appearance defects of centerless grinding
- Spiral patterns on the grinding surface
- Vibration marks on the surface
- Irregular scratches on the surface
- Surface burns
- The carbide round bar is in a polygonal shape (roundness is out of tolerance)
- The diameter of the two ends of the rod is smaller than that of other places
All of the above defects are closely related to the accuracy of the machine tool, the selection or adjustment of the grinding wheel, guide wheel, support plate, feed and output roller, cutting fluid, etc. If we do not strengthen our understanding of processing equipment and materials in production and improve our technical level, it will seriously affect the processing accuracy and quality of the product.