1. Twist Drill Introduction:
A twist drill is a tool that drills circular holes in workpieces by rotating about a fixed axis. It gets its name from its spiral chip flutes, which resemble a twist. Spiral flutes can have two, three, or more flutes, but two flutes are the most common. It is clamped in manual or electric handheld drilling tools, drilling machines, milling machines, lathes, and even machining centres. Drill bits are typically made of high-speed tool steel or carbide.

2. Twist Drill Classifications
1) Straight Flute Drills:
Mainly suitable for castings and aluminium alloys. Straight flute drills feature a wiper edge to improve surface finish. Internal coolant is recommended to ensure reliable chip removal, workpiece finish, and tool life.
2) Reamer Drills:
Reamer drills are generally used for semi-finishing or final machining of holes. They typically achieve an accuracy of IT10 to IT11 and are used for pre-processing or enlarging holes in stock prior to reaming or grinding. They have three to four lands and no chisel edge.
3. Common Twist Drill Point Types
P-Type Drill Point
Mainly used for small-diameter drills. The chisel edge is automatically formed after the end edge is ground to a clearance angle, approximately equal to the core thickness.
A-Type Drill Point
When grinding the chisel edge, only a small arc is formed. The chisel edge is shortened, forming a corner on the main cutting edge.
B-Type Drill Point
When grinding the chisel edge, a bevel and arc are formed from the rake face. This can completely smooth and strengthen the end edge rake face.
C-Type Drill Point
When grinding the chisel edge, a straight line is cut from the rake face and a straight line is removed from the flank face. The chisel edge shape varies depending on the included angle of cut.
S-Type Drill Point
The chisel edge has a symmetrical, inverted arc.

4. Drill Bit Back-Tap Design
Main Functions of the Back-Tap:
- Increases chip clearance for easier chip removal.
- Protects the machined surface, reduces friction, and improves surface finish.
- Back-Tap: 0.2-0.3/100
5. Twist Drill Helix Angle Design
Small Helix Angle β ≤ 25°
Drills with a small helix angle are used for drilling short-chipping materials, such as cast iron or brass.
Medium Helix Angle β = 25°-35°
Medium helix angle drills are versatile and are generally the preferred choice for drilling most workpiece materials.
Large Helix Angle β > 35°
High helix angle drills are used for drilling soft workpieces that produce wispy chips, deep hole drilling, and other applications requiring high penetration and rapid chip evacuation.
6. Functions of Twist Drill Margins
- Controls contact between the drill bit and the hole wall
- Supports radial forces from the drill tip
- Improves the surface finish of the hole wall
Drill margins can be single, double, triple, or even multi-margin.
Wider margins
· Stable drilling
· Improved hole dimensional tolerances
· Polished hole walls
· Improved hole roundness
Narrow margins
· Reduced friction and heat
· Reduced heat transferred from the workpiece to the drill bit
· Increased drill life
· Reduced hole surface roughness Scratches or scratches
7. Spot Drill Size
A good pre-centring method is to drill a pilot hole 2-3xD deep and 0.01-0.02mm larger in diameter. When using a long drill bit, use a low speed and a medium feed rate to enter the pilot hole.

Carbide drills manufacturer >>>
8. Spot Drill Point Angle
The point angle of a spot drill bit should be 5°-10° larger than that of a long drill bit.
9. Drilling Cutting Parameters
1) Drill cutting parameters are typically expressed in terms of rotational speed n or cutting speed Vc and feed per revolution f.
2) Cutting speed Vc (m/min) is determined by the drill bit speed and diameter. From the centre of the drill bit to the outer circumference, the speed ranges from zero to maximum, so the cutting speed refers to the maximum speed at the outer circumference.
3) Feed per revolution f (mm/rev) indicates the axial movement of the drill bit per revolution.
4) How to Improve Drilling Efficiency
Increasing the spindle speed or increasing the feed per revolution can both improve efficiency, but the economic benefits differ. Therefore, to improve efficiency, first select a high feed rate per revolution. Assuming tool strength and machine rigidity are met, then appropriately increase the spindle speed.
10 Principles for Selecting Cutting Parameters
1) For drills of the same material, cutting parameters should be determined based on the material being machined, processing conditions, and requirements.
2) For step drills, a compromise approach should be used to determine cutting speed and feed rate.
3) The smaller the drill diameter, the higher the spindle speed and the lower the feed rate per revolution, and vice versa.
4) When using external coolant, the cutting speed should be 20%-25% lower than when using internal coolant; the feed rate should be 15%-20% lower when using external coolant.
When drilling deep holes, using a higher cutting speed and a lower feed rate (taking advantage of the chip-flinging effect) is recommended compared to drilling shallow holes to facilitate chip breaking and evacuation.
11. Effects of Cutting Speed
1) Excessively high cutting speeds can lead to:
- Rapid wear of the drill’s flank face
- Plastic deformation of the cutting edge
- Poor hole quality
- Out-of-tolerance conditions
2) Excessively low cutting speeds can lead to:
- Built-up edge formation on the drill bit
- Poor chip evacuation
- Low productivity
3) Excessively high feed rates can lead to:
- Good chip evacuation
- Reduced cutting time
- Reduced tool wear
- Higher risk of drill breakage
- Poor hole quality
4) Excessively low feed rates can lead to:
- Longer chips
- Improved quality
- Accelerated tool wear
- Longer cutting time
12. Chip Control
1) Chip formation and chip evacuation are critical issues in drilling. They depend on the workpiece material, drill geometry, coolant pressure/volume, and cutting parameters.
2) Chip blockage can cause radial movement of the drill bit and affect hole quality, drill life, reliability, and even lead to drill breakage.
3) Chip formation is acceptable when chips can be evacuated smoothly from the drill bit.
4) During machining, pay attention to the following points:
4.1 Monitor the cutting sound: A continuous sound indicates good chip evacuation, while an intermittent sound indicates chip jamming.
4.2 Check the feed force or power monitor: If any abnormality is present, chip jamming may be the cause.
4.3 Inspect the chips: If the chips are long and curved but not curled, chip jamming is present.
4.4 Inspect the hole: If chip jamming is present, an uneven surface will be visible.
13. Select the appropriate drill bit based on hole depth and diameter.
1) For holes less than 20mm, generally use a solid carbide drill or high-speed steel drill.
2) For holes with a ratio less than 10, use a solid carbide straight-flute drill or twist drill (with or without internal coolant, depending on the specific situation; it is generally better with internal coolant than without).
3) For holes with a ratio between 10 and 30, use a solid carbide deep-hole twist drill (must have internal coolant).
4) For holes with a ratio greater than 30, use a gun drill (must have internal coolant).
5) Consider other comprehensive factors to select the appropriate drilling tool.