The types of cutters commonly used in milling operations mainly include the following categories:
1. Shank milling cutter
Handled milling cutters include straight shank and taper shank, which are suitable for end milling. Straight shank milling cutters are usually used for smaller milling cutters with a diameter of less than 20mm, while larger diameter milling cutters are mostly made into taper shanks. Common shank milling cutters include end mills, end mills, keyway milling cutters, and T-slot milling cutters.
2. Hole milling cutter
Hole milling cutters are suitable for horizontal milling machine processing and can process various surfaces. Common hole milling cutters include cylindrical milling cutters, three-face milling cutters, and saw blade milling cutters. Cylindrical milling cutters are used to process planes, three-face milling cutters are used to process right-angle grooves and step surfaces and saw-blade milling cutters are mainly used to cut off workpieces or mill narrow grooves.
3. Cylindrical milling cutter
A cylindrical milling cutter is a common type of milling cutter, mainly used for milling planes and inclined surfaces.
The cutting edge of the cylindrical milling cutter is developed around the cylindrical cutter body, with a large cutting area and high cutting efficiency. It is suitable for roughing and semi-finishing, and can efficiently remove a large amount of material. The cutter body of the cylindrical milling cutter is generally made of solid carbide or high-speed steel material, with high hardness and wear resistance. It can be used to process planes on horizontal milling machines, with straight teeth and spiral teeth.
4. Face milling cutter
It is used to process planes on vertical milling machines, end milling machines or gantry milling machines. There are three types of coarse teeth, fine teeth and dense teeth. It has good cutting speed and rigidity, high productivity and low surface roughness value.
5. End milling cutter
It is used to process grooves step surfaces, etc. The teeth are on the circumference and end face, and cannot be fed axially during operation. When there are end teeth passing through the centre on the end mill, axial feeding can be performed. Suitable for a variety of processing needs.
6. Three-sided milling cutter
Used to process various grooves and step surfaces, with teeth on both sides and the circumference, suitable for improving side cutting conditions and improving processing quality.
7. Angle milling cutter
The angle milling cutter is a milling cutter with a specific angle, mainly used for processing bevels, angles and curved surfaces, used for milling grooves at a certain angle, and there are two types of single-angle and double-angle milling cutters.
There is a certain angle between the cutting edge of the angle milling cutter and the cutter body, and the angle can be adjusted as needed. This milling cutter is suitable for processing parts with bevels, angles and curved surfaces, such as bevel grooves, oblique holes, etc. The cutting edge of the angle milling cutter is generally made of high-hardness materials, such as carbide or diamond, to improve cutting efficiency and processing accuracy.
8. Saw blade milling cutter
Used to process deep grooves and cut-off workpieces, with more teeth on the circumference, suitable for cutting and processing narrow slits or narrow grooves. In order to reduce friction during milling, the teeth have a secondary deflection angle of 15′~1° on both sides. In addition, there are keyway milling cutters, dovetail slot milling cutters, T-slot milling cutters and various forming milling cutters.
9. Modula milling cutter
Used for machining gears, etc., suitable for machining specific parts.
These cutters each have their specific application scenarios and advantages in milling operations. Choosing the right cutter can improve machining efficiency and workpiece quality.
